0
To force the driving mechanism of a machine, a clutch will be used. This mechanical device provides driving force by connecting the driven mechanism to the driving mechanism. This clutch is the opponent of the brake which is used to stop the motion from going. Usually a clutch will be placed in between a two-rotating shaft. As one shaft is placed on the motor to provide the power for the work, the other shaft will give the output of the mechanism. It means one shaft will act as the driven mechanism while other shaft will act as the driving mechanism.
As the most trustworthy clutch provider on the internet, Polyclutch.com has large inventories of various clutches which are ready on stock. Slip clutches are available in various models to meet the design of each mechanism. Series 16 slippers are the most compact model with big torque inside the small package. The weight of the torque 10lbs/in and the shaft size is 3/8 inch. The most common style is called as slipper of which size is 5/8 inch and of which weight is 75lbs/in. The air actuated edition of slipper is called as pneumatic clutch which can be adjusted to any model and mechanism as the work is flowing. The weight of the torque is ranging by 300lbs/in in average as the size of the shaft is 5/8 inch. As the workspace of the mechanism may require a low backlash, slip-ease clutch will be on demand. This clutch is also available at the online store along with stepping motors by Polyvolt. The sub-fractional horsepower motor is both geared and un-geared to adjust with the demand of motion which requires time controlling.
Please visit the website directly to gain further information of the product! The detail instruction of each clutch is available to be downloaded along with the ordering spec sheet from the website.
